N hour. How to calculate man-hours

The heads of organizations are required to indicate the data on the man-hours worked in the form of static observation No. P-4 “Information on the number and wages of employees”, approved by the order of Rosstat dated October 26, 2015 No. 498. They also approved the rules for filling it out.

Formula for P-4, man-hours, calculation:

HH \u003d CH1 + CH2 + ... + CHN,

where:

HH - number of man-hours worked;
ChN - the number of hours worked by each specific employee.

They add up all the time worked by an employee on working days in the organization, as well as outside it. Work in, work for (at the same enterprise) are taken into account.

Therefore, if the enterprise has employees who work full-time and part-time, separate calculations are made for them, using. The formula in this case would look like this:

HH \u003d KR * RV,

where:

HH - man-hours;
KR - the number of employees;
RW is the time actually spent on the job.

Calculation of man-hours

A man-hour is a unit of work time accounting that corresponds to one hour of work by one person. It is convenient for the employer to plan with its help working time employees, determine the right number of workers to complete the work, and set deadlines for completing tasks.

H \u003d K * T,

where

H is the indicator itself, man-hour;
K - the total number of employees of the enterprise;
T is a unit of time, hours.

But there are periods that should not be taken into account when calculating. It:

• the period of illness of the employee, according to;
• time ;
• the period is not taken into account;
• the time for which the working day of employees of certain categories was reduced in accordance with the instructions of the legislation of the Russian Federation;
• time given to an employee who has recently given birth to breastfeed;
• other reasons.

Example

Let's take an example for a small firm. Let's imagine that 10 employees work in it. On a day, the total amount of hours worked by them is 80 man-hours:

10 people * 8 hours

The resulting number must be multiplied by the number of working days in a month:

80 person/hours * 21 days = 1680 person-hours.

Now let's calculate this indicator for each employee.

With a five-day working week and an eight-hour working day, the calculation will be as follows:

21 days * 8 hours = 168 man hours

man-day

We figured out the man-hours. In this section, we will consider what is commonly understood by the term man-day. This is a unit of measurement of working time, corresponding to the working day of one person, regardless of the number of hours worked by him. It should be noted that this indicator is less accurate than the man-hour.

Measured in man-days:

• days actually worked by the employee;
• turnaround time;
• days when the employee did not show up for work;
• downtime, including a whole day or more;

Also taken into account:

• days spent on business trips;
• those days on which the employee received the outfits of his enterprise for working out in another organization;
• days when, due to the main workplace, the employee was involved in other activities of the enterprise.

Calculation of man-days

Many are interested in calculating the total number of person-days.

Calculation of man-days, formula:

Kchdn \u003d ∑Khchas / Prab,

where:

Kchdn - the total number of man-days worked;
∑Khh - the total number of man-hours for the reporting month;
Prab - the length of the working day.

• first, we calculate the total number of man-days;
• then we determine the average number of underemployed employees in terms of full.

The formula will be:

C / C number is incomplete. = Kchdn / Krdn,

where:

C / C number is incomplete. - the average number of part-time workers for the reporting month;
Kchdn - total number of man-days worked;
Krdn - the number of working days according to the calendar in the reporting month.

Calculation of man-hours per year

How to calculate man-hours per year? To obtain this indicator, it is necessary to add up all the hours worked by an employee on working days in the company and outside it. That is, the calculation includes the time of work on work trips, overtime work, as well as work in a combined position in the same company.

In the calculation does not take into account:

• the period of illness of the employee, prescribed in the sick leave;
• vacation time for nursing mothers;
• the time when the employee did not work for reasons beyond his control;
• the time of the employee's annual leave;
• cut clock labor day;
• the time when the employee improved his qualifications with a break from the labor process;
• time of participation of employees in strikes;
• other reasons for the employee's absence from the workplace.

The total amount consists of all man-hours for each employee. If you need to calculate man-hours for a year, the formula calculation will be as follows.

Effective work of any enterprise is unthinkable without planning. When drawing up a plan for the production of products or services, you need to know such a value as the standard hour. In essence, the norm hour is a temporary standard for the performance of a particular production operation and reflects its labor intensity and, in the final conclusion, has a direct impact on the cost of products or services provided. You can calculate it independently.

Instruction

1. Gross number of workers hour ov is equal to the number of employees of the enterprise employed in production, multiplied by the time that was spent on the production of some product by the combined efforts of these workers. It will not be equal to the actual cost hour am, which could serve as a standard. This is due to the fact that in the production process the entire minute of working time was not used with an equal degree of intensity.

2. Learn what hour That time was used for rest breaks. Let's imagine you calculate the norm hour s for a production unit in which 10 people work for 1 working week with a total duration of 40 hour ov. During the day they take two rest breaks of 10 minutes each. Thus, the total time that 10 workers spent on breaks during a five-day working week will be: (10 minutes * 2 * 5 days) * 10 people \u003d 1000 minutes or 16.7 hour ov. Consequently, taking into account the time spent on the break, the total time for production was: 10 * 40 hour ov - 16.7 = 383 hour a.

3. To make your calculations more accurate, they should take into account the days of temporary disability and absenteeism. This indicator may fluctuate depending on the time of year and solemn days brought to different periods. As practice shows, on average for the year it is 4%. Specify the calculated values ​​taking into account this parameter, the number of man-hours spent hour ov will be equal to: 383 - (383 * 0.04) \u003d 367.7 people hour ov.

4. This indicator is also theoretical and needs to be clarified, because labor productivity during one working day is also different. At the beginning of the day, workers need time to prepare for work, and at the end - to get ready for home. Besides, hour Time can be lost due to lack of necessary materials, tool breakage. Such losses, traditionally, do not exceed 7% of working time. With this in mind, the potential number of people hour ov will be equal to: 367.7 - (0.07 * 367.7) \u003d 367.7 - 27.7 \u003d 342 people hour but actually available.

5. Now calculate the norm hour s. If the labor productivity of a given working group does not exceed the norm and is equal to 100%, then the number of normative hour ov will be equal to 342, if labor productivity in this group is higher and equal to 110%, then you will have 342 * 1.10 = 376.2 standard hour a.

6. From these calculations, you will be able to see that if this group is assigned a work order, the estimated completion time of which is 400 hour ov, then the workers will not be in time to fulfill it in a week. Take this into account and solve the problem by increasing the number of workers or transferring hour order to another division.

Calculation regulatory numbers personnel is needed to form the optimal number of employees in the state of the enterprise. This is a management task that allows you to achieve your goals and at the same time observe the regime of work and rest of the staff, considering that some part of the team will not come to work due to temporary disability or regular vacations.

Instruction

1. To determine the required headcount personnel (W), which is optimal, the following formula is applied: W = N * Kn, where: N is the standard number of employees, Kn is a target indicator that considers the absence of employees in the workplace due to illness or being on regular leave. Desirable staff number personnel (W) is determined without the control of technical employees - loaders, drivers, cleaners.

2. Kn is calculated by the formula: Kn = 1 + Days, where: Days is the share of non-working time in the total working time fund for a certain statistical period. The general fund of working time is determined by the production calendar. Days is calculated as the ratio of the sum of hours absenteeism of employees to work to the total number of working hours for the specified period.

3. When calculating Dn, please note that according to the law, in accordance with Labor Code RF, the planned number of non-working days is 49. Of these: 28 working days - the next labor leave, 7 working days - the established norm of holidays without saving wages and 14 working days - the standard of absenteeism on the basis of sheets of temporary disability. With an 8-hour working day, the total number of non-working hours during the year will be 392 hours.

4. To calculate the standard number of personnel (N), use the formula: N \u003d V / (Frv * Hvyr * Kvn), Where: V is the planned volume of work in the units of measurement that are accepted at this enterprise, Фв is the working time fund for the upcoming planning period according to the production calendar, expressed in hours, Нvyr is the revenue rate; Kvn is the indicator of planned fulfillment of the norms. The Kvn indicator is determined as the quotient of dividing the planned revenue for the corresponding period of the planned year by the actual revenue of the previous year.

Working hour- the cost of one hour of effective operation of a particular equipment, site. Used in normalization technological operations and is directly involved in the calculation of the cost of production ... Brief explanatory dictionary of polygraphy

working hour- (2 m); pl. normal hours /, R. normal hours / in ... Spelling Dictionary of the Russian Language

Labor intensity of manufacturing- 7.1. Labor intensity of manufacturing (GOST 14.205 83), pers. h Labor costs for installation Source: GOST 4.22 85: System of product quality indicators. Kra…

GOST 4.301-85: System of product quality indicators. Installations, devices, devices, blocks, modules of functional aggregate means of control and regulation. Nomenclature of indicators- Terminology GOST 4.301 85: System of product quality indicators. Installations, devices, devices, blocks, modules of functional aggregate means of control and regulation. Nomenclature of indicators original document: 2.1. Probability… … Dictionary-reference book of terms of normative and technical documentation

Embed code

2020-02-18 10:50:38

And where did they lose Opel Astra -H 1.8 in 2014?

Alexander

2019-09-12 20:57:32

Tell me how to reset what I counted? Doesn't respond to cross

2019-07-06 11:29:02

Good afternoon! Tried to find an oil change. So it gives ^ "Engine assembly - changing the oil and oil filter (with flushing the lubrication system)" - 9 hours. This is fine!? "Engine assembly - oil and oil filter change" - 45 h. What is it!?

vladimir

2019-04-10 18:16:44

did not find a chevrolet in the list

Alexander

2019-03-22 03:03:17

Here you are http://uazpatriotsib.ru/forum/page.php?p=autonormy select the brand, year, model - a link appears on top of the table - return to the selection - and then loads your entire page, there, when hovering, you can even see that the link leads https: // site / autonorms, but it is necessary to return to the forum to choose a car

2019-03-21 12:34:00

Alexander

2019-03-21 12:28:35

Good afternoon, I inserted your code to my forum, but clicking on the link to return to the choice of auto loads your page (but it is necessary to load the original form, can I somehow fix it?

2019-02-20 17:12:50

I would like more norms of time for body repairs.

Gennady

2018-10-10 13:06:20

Really easy to use and informative. Well done!

Vyacheslav

2018-07-06 04:52:37

GOOD FELLOWS!!! How else to enter other works YOURSELF!

2018-06-12 14:45:18

The norms are crazy. C / a shock absorber 1.2 hours, replacement of the shock absorber support 1 hour.

Alexander

2017-09-15 10:12:06

Will not work! Work!

Gennady

2017-09-14 09:25:25

Excellent! Incredible great job you did...

2017-08-24 20:35:53

Guys, great topic! everything is super but raw... add ads around the edges because there is a place!!! and details, I will support a couple of hundred for good idea))

Ivan atlib.ru

2017-07-20 14:24:27

Let's try

Ivan atlib.ru

2017-07-20 14:24:17

There is no such function

Ivan atlib.ru

2017-07-20 14:23:04

No new data yet

2017-07-20 14:21:52

What to do with a car after 2004 onwards? Is there an app for android that calculates the hourly rate?

Yuri Petukhov

2017-04-20 02:14:43

Add time limits for Ural-4320 car

Alexander Marchenko

2017-01-26 17:57:10

add prior, year, according to Daewoo, body and year

Vityok Kudinov

2016-11-26 19:20:07

look at the vaz 12 brakes in front of the caliper right with / at the time of work 65.00 hours 5 days to do it

Evgeny Stepanyuk

2016-11-07 13:35:00

Hub bearing - c / a 145.00 as well as this on a vaz 2112

2016-08-04 13:57:25

no ford transit 2014-2016? Why only until 2004?

2016-07-03 17:49:41

Rear hub bearing VAZ, 98 norm / hours: DDD

Ivan atlib.ru

2016-02-25 10:50:27

Hello, unfortunately there is no Chevrolet

Denis Novokreshchenov

2016-02-25 04:06:08

Tell me, there is no Chevrolet in the online application, but in full version there is?

Denis Novokreshchenov

2016-02-25 04:03:43

Guys, look at the norms for VAZ, clutch and gearbox. Apparently the point is not there.

ANATOLY TROFIMCHUK

2016-01-16 10:45:21

The position in the table is not deleted. what to do?

Valery Valerievich

2016-01-11 22:37:02

For some reason, the time norms do not work, something has changed.

2016-01-08 10:04:24

Hello. Temporary issues, will be fixed soon.

Alexey Skorobogatov

2016-01-07 16:08:00

why is there a choice of cars, but there are no norms for it ???

Vladimir

2015-11-15 03:31:37

Hello, what are your normal hours? 26 what to change the front pads vaz 2115? With the wheel removed, it's 2.6 minutes, unless ... They promised to fix it. Where else is the woofer for removing the units and assemblies themselves?

Ivan atlib.ru

2015-11-13 11:39:33

Hello. Probably this is a mistake. Data taken from open sources - and provided "as is". There is no other information.

2015-11-13 08:54:17

Replacing the clutch disc on a VAZ 2115 - 47 hours? or plugs on the removed box 27 hours? Do not mislead people. Don't lie about the free service. If you don't want to give away information for free, be honest about it.

Ivan atlib.ru

2015-11-10 10:15:14

hello, cleared

Sergey Parfenov

2015-11-10 08:53:10

I can not clear the table, it is added every time.

2015-10-12 20:07:32

And adding cars is not planned in "AUTONORM online". Interested in Caterpillar, Man, Scania?

Vladimir Novikov

2015-09-21 15:56:12

Ivan atlib.ru

2015-09-21 15:34:36

Vladimir Novikov

2015-09-21 15:32:39

We are waiting for the code to embed on your site. Guys, when it appears, write plz [email protected]

Dmitry Nikitin

2015-08-01 16:52:32

Download Wurth Online the World 4.15 The rules are fresh for 2014

2015-07-07 14:13:18

Tie rod end internal - with / at (on the removed draft) 2.00 Pendulum lever with bracket assembly - repair (removed from the car) 35.00 Pendulum lever with bracket assembly - with / at 63.00 Tie rod assembly left - with / at 62.00 Rod right steering assembly - c / a 62.00 Tie rod middle assembly - c / a 7.00 something cool!!!????? and replacement of candles 2 N/hour

Ivan atlib.ru

2015-05-27 13:12:54

Hello, when we finish with the update, it will be available for free.

Artem Pshenichnyuk

2015-05-27 13:10:15

Is it possible to purchase such a program, but with new models (on-line access is possible)???

Stanislav Kotov

2015-05-21 19:02:38

there is no body repair and molar and this is very bad, because. in an accident, the paintwork and the body suffer mainly

2015-04-08 10:14:25

We definitely don't have

2015-04-07 22:47:55

super. and where to look at the norms for gas 53?

2015-04-07 15:09:52

No, I didn't have that feature :(

2015-04-07 14:17:32

posted on the site, but how to set the Cost per hour: so that users cannot change them?

2014-11-11 10:32:21

This is a fair remark. This is exactly what we are doing.

Gleb Bacha

2014-11-11 05:27:28

all this is not bad, but the norms are taken from the reference books of the USSR and the Russian Federation in the 90s and early 2000s, and in the "yard" 2014. I would like to see standard hours for trucks of foreign production - SCANIA, VOLVO, DAF, MERCEDES.

2014-10-18 22:39:05

1.76h x 60min=105min (1h 45min)

Alexander Davydov

2014-04-18 21:23:00

the program is of course sensible, but not all cars are there, maybe someone will advise where to dig up the norms for Nissan Murano 2006 3.5 gasoline v 6

Anatoly Tulubiev

2014-03-18 09:56:27

Where in atonormah Chevrolet?

Yana Grigorieva

2014-03-10 19:15:46

Lord, how interesting it all is)))) Thank you for the DIPLOMA, if it weren’t for you I would never have learned so many new things .. Men, does anyone have a guide to standard hours) and it’s very, very necessary) Thank you in advance.

2014-02-20 11:47:18

Throw on [email protected] trying to get back to normal

Yuri Kopytko

2014-02-20 09:30:37

I have norms from one program, only they are a kind of file, if a normal programmer can give sense, I can throw off write email

Yuri Kopytko

2014-02-20 09:26:10

a good thing is that this watch is the norm, of course there is not everything, but everything is nowhere to be found. And I did not see a program without errors, for example, the same TECDOC or AUTODATA !!

Gleb Bacha

2014-01-20 02:17:15

Suppose the standards for KAMAZ are taken from: "standard time standards for the repair of trucks of the MAZ, KAMAZ, KrAZ brands with diesel engines", which was approved on July 7, 1980 by the approved secretary of the USSR Civil Code on labor and social issues and the Secretariat of the All-Union Central Council of Trade Unions, all this was in the 80s, and now it's already 2014 other standard hours

2013-12-27 10:35:34

At Corolla 98, removal / installation of candles 0.2-0.4 n.h. depending on modification. At Forester - yes 0.9 n.h. Maybe you mixed up, but as always someone is to blame. :)

Sergei Shoshin

2013-12-27 02:44:41

This is bullshit, not normal hours. I compared the standard hours for replacing spark plugs with a 98 Toyota Corolla and a Subaru Forester turbo, in both cases - 0.9 hours, they are hardly 4 on the Corolla, and it takes 5 minutes to change them, and on the Forester you need to remove the intake, expansion, etc., with good dexterity in an hour can be managed ....

2013-12-06 13:45:16

All auto repair standards are taken from the "Directory of auto standards" of one of the divisions of "Bosch Service" released before 2004.

Mars Aktymbaev

2013-12-06 07:48:42

UAZ 2206 - hood coloring 5.5 h / h. This model does not have a hood at all. If this means the engine cover in the cabin, then I don’t think that so many hours are needed for painting.

Mars Aktymbaev

2013-12-06 07:06:26

Very good and useful site! But normal hours. Where are they from? We need some links to official data, or at least the name of the directories where these standards are taken from

Ivan atlib.ru

2013-11-14 10:13:07

1.76 normal hours = 1 hour 45 minutes

2013-11-14 08:09:32

I can never catch up. what does running time 1.76 mean one hour 76 minutes? or crank shaft 3.93.

2013-10-02 16:47:07

Unfortunately, I can't find new time standards in the public domain.

Ivan Markin

2013-10-02 16:32:07

All this is very good! A very simple and necessary program, but why doesn’t the admin add new car models? I think this is very important!

2013-09-25 13:21:14

Yes, most of all a mistake. If we start from "Engine assembly - c / a - 73 n.h", then "with the radiator and air filter removed" I think 61.5 n.h.

2013-09-25 13:14:48

VAZ 2123 engine section. Engine assembly - c / a (with the radiator and air filter removed) - 615 hours.

2013-08-12 18:48:12

Unfortunately no

2013-08-12 18:46:15

where is Chevrolet?

Igor Lebed

2013-05-30 10:18:49

In principle, all work coincides in terms of hours with "Autodata 3.38", only here it is cut down by the number of works and car brands, and especially by the year the car was produced (everything is before 2004), but the fact that everything is in Russian, for this is a huge compliment!!! Would like additions...

2013-05-23 13:55:36

What legislation provides for the hourly rate for car repairs ???

2013-04-25 10:54:03

Thanks for the comments, we're in the process of redoing it.

2013-04-25 08:29:56

Correct the norms on the VAZ-2115, otherwise positions like this one are very embarrassing ...: Left rear wing apron bracket - replacement - 57 hours !!! And so each position...

2013-04-11 15:54:50

Not yet, soon we will make an opportunity for insertion.

2013-04-11 15:52:15

well done! How about posting it on your site?

2013-04-09 11:25:24

thanks for the advice

2013-04-08 22:58:57

sharpen this data for android, sell the application for one euro and you will have a lot of happiness.

2013-02-08 09:33:49

Is there anywhere to get it?

Yuri Serbutovsky

2013-02-07 20:48:07

It would also be necessary to add Chevrolet autonorms

Yuri Serbutovsky

2013-02-06 23:43:48

Bomb site!!! And you don't need different programs according to Norma hours

Ivan atlib.ru

2013-01-26 21:36:53

Thank you for answering questions with us, sharing interesting videos, photo reports ..

Dmitry Bochkov

2013-01-26 13:52:33

Site SUPER! Thank you guys!!!

2012-12-07 10:20:43

Unfortunately no!

2012-12-06 20:42:43

there are no autonorms for the repair of GA-33104 Valdai?

2012-10-06 17:54:22

The data is taken from the auto manufacturer's directory. Why did they decide that "removal / installation of the threshold lining" takes 12 hours. hard to say, maybe wrong.

2012-10-06 16:58:12

Facing of a threshold of a door - with / at 12 n.ch?????? not too much? where is the data from? a little unbelievable! (model VAZ-2112)

2012-09-19 20:23:34

completely pisses me off!

2012-09-10 09:47:45

Accepted for work

2012-09-01 17:03:44

Still the ability to print the act, the score would be +1

What is "norm-time"?

The automaker, in addition to manufacturing a car, worries about its warranty and post-warranty service. Providing service with all the necessary materials for repairs has long been an entire industry, ranging from special tools to complete specifications for repairs. No need to think and guess how to do this or that operation, but simply follow the specification.

Norms-time, autonorms, repair time are synonyms that can be described as follows: the “time” declared by the automaker that you will spend on the repair operation (standard).

Regulations

The standards (or in other words, the complexity of the work) are built on the following principle: "What to do?" and "What time is it?".

Each automaker structures them in its own way, and the operations for each car can be broken down into different “sub-operations”. For example, for Iveco 30.10C Combi Daily, 1996-00 - the standard "Front axle wheel bearings (all, on both sides) - with / a" implies that removal / installation is done on both sides, and for Honda Civic 5dr, 1991- 96 counts each side separately - that is, it is necessary to indicate: "quantity = 2".

Standard hour cost

Normo-hour is a unit of labor intensity, which differs from the astronomical concept of an hour. This is such an abstract value, to which the price is tied and the cost of repairs is obtained. Although, the value of the standard hour, declared by the automaker, often does not converge with reality. In order to repeat the standard, it is necessary to create conditions corresponding to the “experiment”: expand special tool, draw up a work plan, start the stopwatch and “let's go!”.

But in reality: the key does not fit, the nut is stuck, the fuel oil has spread, it is necessary to wipe it (and so on) - all this time, but it is not taken into account by the automaker.

But you need to build on something, so the standard hour is an approximate value. And its cost depends on three factors:

• The type of work (fitting and mechanical, electrical installation, fittings, repair of units, painting) - here as you like, and also how highly paid the specialist is.
• Car brands: so the average cost per hour for Daewoo is 650.00 rubles, and for Bugatti - 7700.00 rubles. and plus the price of the insurance contract.
• The share of service stations from the cost of the work of the master.

About the service "AUTONORM online"

40 brands, 3,000 models, 600,000 standards - this is the material that is available on our portal to everyone at any time of the day. Easy and understandable interface plus structured standards make working with the service convenient and productive.

Editing positions (standards)

When you click on the standard link in the upper table, the standard enters the table of selected positions with the time norm value declared by the automaker. But sometimes it is necessary to edit the name, quantity, time-rate, cost. We foresaw this need and added an editing function by double-clicking on an entry in the table of selected standards, where all fields are available for editing.

Editing add. information

For convenient and productive work with the service, you must specify two values:

• Cost per hour (standard hour): used to specify the default cost when adding a standard. Those standards that were added before setting the cost will be corrected automatically after it is added.
• Name of the organization - this information is displayed when printing.

Repair cost calculation

To calculate the cost of repairs, you must specify the cost of a standard hour. The cost of work is calculated in the context of standards and summed up in the final amount.

Who can benefit from the "AUTONORM online" service?

In creating the Autonorma-online service, we focused on two categories of users, but we will be very happy if the audience of the service is wider.

Car services, service stations

Every day you have to deal with the calculation of car repair work, billing, acts, and in these documents the list of work performed is often taken out of your head. Service "Autonorms online" created in order to simplify the work of the service station manager, since everything is as simple as possible - you need to select the necessary job name from the list and that's it!

For car owners

When repairing a car, you are not always aware of what is actually done by the skillful hands of the service station masters.

With the help of the new "Autonorms Online" service, you can calculate the approximate cost of repairs yourself or draw up a general work plan for a service station. Even without special special knowledge or skills in this difficult matter, you will be able to have a general idea of ​​what will be done by the masters, giving your car into the hands of the service station specialists. That means being in control!

To determine the cost of one standard hour repair work at the car service enterprise, a calculation is made in the form of table 3. The initial data for the calculation is: the basic salary of repair workers for one hour of work, determined as follows:

Calculation of the hourly rate of the worker of the first category

Organizations and individual entrepreneurs may set their monthly wages for workers, but not lower than that set by the state. The minimum wage for the month from 01.01.09 is 4330 rubles. The calculation of the hourly rate of a car mechanic of the first category at the minimum wage established at the enterprise is made in the form of table 1 according to the formula:

where FROM T min - hourly rate of a worker of the first category, rub.;

minimum wage- the minimum monthly wage set by the state, rub.;

To SW- the coefficient of increase in the monthly rate of workers at the enterprise;

T slave. months - average annual number of working hours per month, hours (assumed to be 167 hours);

To R- regional coefficient.

Table 1 - Calculation of the hourly rate of a repair worker

working	Minimum wage, rub.	Magnification factor (TO SW )	enterprise, rub.	District coefficient ( To R )	hourly rate ( FROM T min), rub.

Calculation of the basic salary for one hour of work

To determine the basic salary of repair workers for one hour of work, the average hourly wage rate of workers at a production site (post) is calculated ( FROM T cf. R., rub.) determined by formulas (2) and (3) in the form of a table (2):

where To T cf. R. - average tariff coefficient; To T b. R. and K T m. - tariff coefficients, respectively, of the larger and smaller categories, between which lies the average category (Appendix 1); R Wed and R m- the value of the average and the smaller integer digit closest to it (the value of the average rank of the performer of the work is taken from the technological part of the course project in the discipline " Maintenance cars").

Calculation of the basic salary of repair workers for one hour of work ( W O, rub.) is carried out in the form of a table (2) according to the formula:

where To D- coefficient of additional payments to the hourly fund (recommended in the amount of - 1, 2 - 1, 4).

Table 2 - Calculation of the basic salary for one hour

Based on the data in table 2, a calculation is made in the form of table 3.

Table 3 - Calculation of the cost of one standard hour, rub.

Name Expenditures	Calculation formula costs	costs	Amount of expenses, rub.
1. Basic salary of repair workers (SR)
2. Additional salary of maintenance workers (SR)	W d \u003d W about H (10% h 11%)
3. insurance contributions to funds	SV \u003d (Z o + Z d) H 14%	(127+12, 7) *14%
4. Indirect costs (Pkos)	R braid \u003d W about H (80% h 120%)
Total production cost ( FROM etc)	C pr \u003d Z o + Z d + SV + R braid	127+12, 7+19, 5+101, 6
5. Selling expenses (Rcom)	P com \u003d C pr H (4% h 6%)
Total total cost ( FROM P)	C p \u003d C pr + R com
Profit ( P)	P \u003d C p H (10% h 15%)
The cost of one standard hour ( FROM 1 n/h)	C 1 n / h \u003d C p + P

According to table 3, a diagram is constructed "The structure of the cost of one standard hour", which is an image of the relationship between the amounts of costs for each costing article. A reference is made to the diagram in the text of the work, and the results obtained are analyzed.